First mistake and I didn't even mix the first batch of thinset: The edges of one row of cement boards are way too high and form a ridge that leaves the tiles hovering "in the air" by 3/16" on both ends (see picture). This is a huge mistake I can't afford the time to fix by prying out the offending boards. I decided to reduce the ridge by scraping and sanding down what I could. This process of course removed the fiberglass tape reinforcing the joints between the cement boards. …I can feel the issues will cascade from there.
One last thing about cement board best practice: Evidently, taping and mudding joints automatically adds thickness locally which makes the floor uneven. Did I just read that the key to a successful tile job is the flatness of the subfloor? So, inherently cement boards are not your best friends, right? Got to stop over-thinking... It's too late to change anyway.
Doing something constructive at last: Dry-fit the tiles in both directions to plan for the most aesthetically pleasing layout with manageable cuts in both size and placement.
Doing something constructive at last: Dry-fit the tiles in both directions to plan for the most aesthetically pleasing layout with manageable cuts in both size and placement.
 |
The tile has an interesting linen textile effect
Texere From Ann Sacks
|
No comments:
Post a Comment